IEEE 802.11s (mesh) draft standard implementation. More...
Classes | |
class | ns3::dot11s::AirtimeLinkMetricCalculator |
Airtime link metric calculator. More... | |
class | ns3::dot11s::DestinationAddressUnit |
Describes an address unit in PREQ information element See 7.3.2.96 for more details. More... | |
class | ns3::dot11s::Dot11sMeshCapability |
See 7.3.2.86.7 in 802.11s draft 3.0. More... | |
class | HwmpDoRfRegressionTest |
This is a test for intermediate reply and saving routing information about neighbour. More... | |
class | HwmpProactiveRegressionTest |
There are 5 stations set into a column, the center station is root. More... | |
class | ns3::dot11s::HwmpProtocol |
Hybrid wireless mesh protocol – a routing protocol of IEEE 802.11s draft. More... | |
class | ns3::dot11s::HwmpProtocolMac |
Interface MAC plugin for HWMP – 802.11s routing protocol. More... | |
class | HwmpReactiveRegressionTest |
test for multihop path establishing and path error procedures Initiate scenario with 6 stations. More... | |
class | ns3::dot11s::HwmpRtable |
Routing table for HWMP – 802.11s routing protocol. More... | |
class | HwmpSimplestRegressionTest |
Peering Management & HWM Protocol regression test Initiate scenario with 2 stations. More... | |
class | ns3::dot11s::HwmpTag |
Hwmp tag implements interaction between HWMP protocol and MeshWifiMac. More... | |
class | ns3::dot11s::IeBeaconTiming |
See 7.3.2.89 of 802.11s draft 2.07. More... | |
class | ns3::dot11s::IeBeaconTimingUnit |
Describes one unit of beacon timing element. More... | |
class | ns3::dot11s::IeConfiguration |
Describes Mesh Configuration Element see 7.3.2.86 of 802.11s draft 3.0. More... | |
class | ns3::dot11s::IePerr |
See 7.3.2.98 of 802.11s draft 2.07. More... | |
class | ns3::dot11s::IePrep |
See 7.3.2.97 of 802.11s draft 2.07. More... | |
class | ns3::dot11s::IePreq |
See 7.3.2.96 of 802.11s draft 2.07. More... | |
class | ns3::dot11s::IeRann |
See 7.3.2.95 of 802.11s draft 2.07. More... | |
class | ns3::dot11s::MeshHeader |
Mesh Control field, see IEEE 802.11s draft 3.0 section 7.1.3.5b. More... | |
class | ns3::MeshHelper |
Helper to create IEEE 802.11s mesh networks. More... | |
class | ns3::dot11s::PeerLink |
Peer link model for 802.11s Peer Management protocol. More... | |
class | ns3::dot11s::PeerLinkCloseStart |
802.11s Peer link close management frame More... | |
class | ns3::dot11s::PeerLinkConfirmStart |
802.11s Peer link confirm management frame More... | |
class | ns3::dot11s::PeerLinkOpenStart |
802.11s Peer link open management frame More... | |
class | ns3::dot11s::PeerManagementProtocol |
802.11s Peer Management Protocol model More... | |
class | ns3::dot11s::PeerManagementProtocolMac |
This is plugin to Mesh WiFi MAC, which implements interface to dot11s peer management protocol: it takes proper frames from MAC-layer, extracts peer link management information element and mesh configuration element and passes it to main part of protocol. More... | |
class | PeerManagementProtocolRegressionTest |
Peering Management Protocol regression test. More... | |
Typedefs | |
typedef std::vector< Ptr < IeBeaconTimingUnit > > | ns3::dot11s::IeBeaconTiming::NeighboursTimingUnitsList |
This type is a list of timing elements obtained from neighbours with their beacons: More... | |
Enumerations | |
enum | ns3::dot11s::PmpReasonCode { ns3::dot11s::REASON11S_PEERING_CANCELLED = 52, ns3::dot11s::REASON11S_MESH_MAX_PEERS = 53, ns3::dot11s::REASON11S_MESH_CAPABILITY_POLICY_VIOLATION = 54, ns3::dot11s::REASON11S_MESH_CLOSE_RCVD = 55, ns3::dot11s::REASON11S_MESH_MAX_RETRIES = 56, ns3::dot11s::REASON11S_MESH_CONFIRM_TIMEOUT = 57, ns3::dot11s::REASON11S_MESH_INVALID_GTK = 58, ns3::dot11s::REASON11S_MESH_INCONSISTENT_PARAMETERS = 59, ns3::dot11s::REASON11S_MESH_INVALID_SECURITY_CAPABILITY =60, ns3::dot11s::REASON11S_RESERVED = 67 } |
Codes used by 802.11s Peer Management Protocol. More... | |
IEEE 802.11s (mesh) draft standard implementation.
Current model conforms IEEE 802.11s D3.0 draft version and includes Peer Management Protocol and HWMP (routing) Protocol implementations.
The multi-interface mesh points are supported as an extension of IEEE draft version 3.0. Note that corresponding helper creates single interface station by default.
Implementation of 802.11s draft standard consists of two main parts: Peer management protocol and HWMP - Hybrid Wireless Mesh Protocol.
The task of peer management protocol is the following: -open links detecting beacons and starting peer link finite state machine. -close peer links due to transmission failures or beacon loss.
If peer link between sender and receiver does not exist, the packet will be dropped. So, the plug-in to peer management protocol is the first in the list of ns3::MeshWifiInterfaceMacPlugin
Peer management protocol consists of three main parts:
Procedure of closing peer link is not described detailed in 802.11s draft standard, so in our model the link may be closed by:
Also Peer management protocol is responsible for beacon collision avoidance, because it keeps beacon timing elements from all neighbours. Note, that PeerManagementProtocol is not attached to MeshPointDevice as a routing protocol, but the structure is similar: the upper tier of protocol ns3::dot11s::PeerManagementProtocol and its plug-in is ns3::dot11s::PeerManagementProtocolMac.
HWMP is implemented in both modes – reactive and proactive. Also we have implemented an ability to transmit broadcast data and management frames as unicasts (see appropriate attributes). This feature turns off at a station when the number of neighbours of the station is more than a threshold.
typedef std::vector< Ptr<IeBeaconTimingUnit> > ns3::dot11s::IeBeaconTiming::NeighboursTimingUnitsList |
This type is a list of timing elements obtained from neighbours with their beacons:
Definition at line 67 of file ie-dot11s-beacon-timing.h.
Codes used by 802.11s Peer Management Protocol.
Definition at line 34 of file ie-dot11s-peer-management.h.