ns3::BleNetDevice Class Reference

Link Layer to device interface The ns3::NetDevice includes IP-specefic API which does not map well with the BLE protocol. More...

#include "ble-netdevice.h"

Inheritance diagram for ns3::BleNetDevice:

Collaboration diagram for ns3::BleNetDevice:

Public Member Functions
	BleNetDevice (void)
virtual	~BleNetDevice (void)
virtual void	AddLinkChangeCallback (Callback< void > callback)
void	CompleteConfig (void)
	Complete all configurations By using this function, linklayer, PHY, Channel and NetDevice are interconnected. More...
virtual Address	GetAddress (void) const
virtual Address	GetBroadcast (void) const
virtual Ptr< Channel >	GetChannel (void) const
virtual uint32_t	GetIfIndex (void) const
Ptr< BleLinkLayer >	GetLinkLayer (void) const
	Get the LinkLayer used by this Net Device. More...
virtual Mac48Address	GetMacAddress (void) const
virtual uint16_t	GetMtu (void) const
virtual Address	GetMulticast (Ipv4Address multicastGroup) const
	Make and return a MAC multicast address using the provided multicast group. More...
virtual Address	GetMulticast (Ipv6Address addr) const
	Get the MAC multicast address corresponding to the IPv6 address provided. More...
virtual Ptr< Node >	GetNode (void) const
Ptr< BlePhy >	GetPhy (void) const
	Get PHY to be used by the link layer and this Net Device. More...
virtual bool	IsBridge (void) const
	Return true if the net device is acting as a bridge. More...
virtual bool	IsBroadcast (void) const
virtual bool	IsLinkUp (void) const
virtual bool	IsMulticast (void) const
virtual bool	IsPointToPoint (void) const
	Return true if the net device is on a point-to-point link. More...
virtual bool	NeedsArp (void) const
virtual bool	Send (Ptr< Packet > packet, const Address &dest, uint16_t protocolNumber)
virtual bool	SendFrom (Ptr< Packet > packet, const Address &source, const Address &dest, uint16_t protocolNumber)
virtual void	SetAddress (Address address)
	Set the address of this interface. More...
void	SetChannel (Ptr< SpectrumChannel > channel)
	Set Channel to which the Net Device, and therefore the PHY, should be attached to. More...
virtual void	SetIfIndex (const uint32_t index)
void	SetLinkLayer (Ptr< BleLinkLayer > ll)
	Set the LinkLayer to be used by this NetDevice. More...
virtual void	SetMacAddress (Mac48Address address)
	Get Addresses in Mac48Address Type. More...
virtual bool	SetMtu (const uint16_t mtu)
virtual void	SetNode (Ptr< Node > node)
void	SetPhy (Ptr< BlePhy > phy)
	Set PHY to be used by the Link Layer and this NetDevice. More...
virtual void	SetPromiscReceiveCallback (PromiscReceiveCallback cb)
virtual void	SetReceiveCallback (NetDevice::ReceiveCallback cb)
virtual bool	SupportsSendFrom (void) const
Public Member Functions inherited from ns3::NetDevice
virtual	~NetDevice ()
Public Member Functions inherited from ns3::Object
	Object ()
	Constructor. More...
virtual	~Object ()
	Destructor. More...
void	AggregateObject (Ptr< Object > other)
	Aggregate two Objects together. More...
void	Dispose (void)
	Dispose of this Object. More...
AggregateIterator	GetAggregateIterator (void) const
	Get an iterator to the Objects aggregated to this one. More...
virtual TypeId	GetInstanceTypeId (void) const
	Implement the GetInstanceTypeId method defined in ObjectBase. More...
template<typename T >
Ptr< T >	GetObject (void) const
	Get a pointer to the requested aggregated Object. More...
template<typename T >
Ptr< T >	GetObject (TypeId tid) const
	Get a pointer to the requested aggregated Object by TypeId. More...
void	Initialize (void)
	Invoke DoInitialize on all Objects aggregated to this one. More...
Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
	SimpleRefCount ()
	Constructor. More...
	SimpleRefCount (const SimpleRefCount &o)
	Copy constructor. More...
uint32_t	GetReferenceCount (void) const
	Get the reference count of the object. More...
SimpleRefCount &	operator= (const SimpleRefCount &o)
	Assignment. More...
void	Ref (void) const
	Increment the reference count. More...
void	Unref (void) const
	Decrement the reference count. More...
Public Member Functions inherited from ns3::ObjectBase
virtual	~ObjectBase ()
	Virtual destructor. More...
void	GetAttribute (std::string name, AttributeValue &value) const
	Get the value of an attribute, raising fatal errors if unsuccessful. More...
bool	GetAttributeFailSafe (std::string name, AttributeValue &value) const
	Get the value of an attribute without raising erros. More...
void	SetAttribute (std::string name, const AttributeValue &value)
	Set a single attribute, raising fatal errors if unsuccessful. More...
bool	SetAttributeFailSafe (std::string name, const AttributeValue &value)
	Set a single attribute without raising errors. More...
bool	TraceConnect (std::string name, std::string context, const CallbackBase &cb)
	Connect a TraceSource to a Callback with a context. More...
bool	TraceConnectWithoutContext (std::string name, const CallbackBase &cb)
	Connect a TraceSource to a Callback without a context. More...
bool	TraceDisconnect (std::string name, std::string context, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected with a context. More...
bool	TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb)
	Disconnect from a TraceSource a Callback previously connected without a context. More...

Static Public Member Functions
static TypeId	GetTypeId (void)
	Get the type ID. More...
Static Public Member Functions inherited from ns3::NetDevice
static TypeId	GetTypeId (void)
	Get the type ID. More...
Static Public Member Functions inherited from ns3::Object
static TypeId	GetTypeId (void)
	Register this type. More...
Static Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter >
static void	Cleanup (void)
	Noop. More...
Static Public Member Functions inherited from ns3::ObjectBase
static TypeId	GetTypeId (void)
	Get the type ID. More...

Private Member Functions
virtual void	DoDispose (void)
	Destructor implementation. More...
Ptr< SpectrumChannel >	DoGetChannel (void) const
	Attribute accessor method for the "Channel" attribute. More...
virtual void	DoInitialize (void)
	Initialize() implementation. More...

Private Attributes
Address	m_addr
	BDA Address of this device. More...
bool	m_completeConfig
	Whether the configuration is complete or not. More...
uint32_t	m_ifIndex
Ptr< BleLinkLayer >	m_linkLayer
	The Link Layer for this NetDevice. More...
bool	m_linkUp
	Is LinkUp? More...
Mac48Address	m_macAddr
	BDA address with Mac48Address format. More...
Ptr< Node >	m_node
	Node associated with the NetDevice. More...
Ptr< BlePhy >	m_phy
	The PHY for this NetDevice. More...

Additional Inherited Members
Public Types inherited from ns3::NetDevice
typedef void(*	LinkChangeTracedCallback )(void)
	TracedCallback signature for link changed event. More...
enum	PacketType {   PACKET_HOST = 1, NS3_PACKET_HOST = PACKET_HOST, PACKET_BROADCAST, NS3_PACKET_BROADCAST = PACKET_BROADCAST,   PACKET_MULTICAST, NS3_PACKET_MULTICAST = PACKET_MULTICAST, PACKET_OTHERHOST, NS3_PACKET_OTHERHOST = PACKET_OTHERHOST }
	Packet types are used as they are in Linux. More...
typedef Callback< bool, Ptr < NetDevice >, Ptr< const Packet >, uint16_t, const Address &, const Address &, enum PacketType >	PromiscReceiveCallback
typedef Callback< bool, Ptr < NetDevice >, Ptr< const Packet >, uint16_t, const Address & >	ReceiveCallback
Protected Member Functions inherited from ns3::Object
	Object (const Object &o)
	Copy an Object. More...
virtual void	NotifyNewAggregate (void)
	Notify all Objects aggregated to this one of a new Object being aggregated. More...
Protected Member Functions inherited from ns3::ObjectBase
void	ConstructSelf (const AttributeConstructionList &attributes)
	Complete construction of ObjectBase; invoked by derived classes. More...
virtual void	NotifyConstructionCompleted (void)
	Notifier called once the ObjectBase is fully constructed. More...
Related Functions inherited from ns3::ObjectBase
static TypeId	GetObjectIid (void)
	Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly. More...

Detailed Description

Link Layer to device interface The ns3::NetDevice includes IP-specefic API which does not map well with the BLE protocol.

So, this class provides the basic design to provide a connection between Node, PHY, Channel and NetDevice. There is as such no use of this class in the module but it is possible that some inherited function needs a Net Device class as parameter. Other possible requirement is when using other modules like wifi etc. along with BLE. This class can get along with classes with base class NetDevice.

Config Paths

ns3::BleNetDevice is accessible through the following paths with Config::Set and Config::Connect:

• "/NodeList/[i]/DeviceList/[i]/$ns3::BleNetDevice"

Attributes

• Channel: The channel attached to this device
  • Set with class: ns3::PointerValue
  • Underlying type: ns3::Ptr< ns3::SpectrumChannel>
  • Flags: read
• Phy: The PHY layer attached to this device.
  • Set with class: ns3::PointerValue
  • Underlying type: ns3::Ptr< ns3::BlePhy>
  • Initial value: 0
  • Flags: construct write read
• LinkLayer: The Link Layer attached to this device
  • Set with class: ns3::PointerValue
  • Underlying type: ns3::Ptr< ns3::BleLinkLayer>
  • Initial value: 0
  • Flags: construct write read

No TraceSources are defined for this type.
Size of this type is 96 bytes (on a 64-bit architecture).

Definition at line 49 of file ble-netdevice.h.

Constructor & Destructor Documentation

ns3::BleNetDevice::BleNetDevice

(

void

)

Definition at line 60 of file ble-netdevice.cc.

References m_completeConfig, and NS_LOG_FUNCTION.

ns3::BleNetDevice::~BleNetDevice ( void  )

virtual

Definition at line 66 of file ble-netdevice.cc.

References NS_LOG_FUNCTION.

Member Function Documentation

void ns3::BleNetDevice::AddLinkChangeCallback ( Callback< void >  callback )

virtual

Parameters

callback

the callback to invoke

Add a callback invoked whenever the link status changes to UP. This callback is typically used by the IP/ARP layer to flush the ARP cache and by IPv6 stack to flush NDISC cache whenever the link goes up.

Implements ns3::NetDevice.

Definition at line 245 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::CompleteConfig

(

void

)

Complete all configurations By using this function, linklayer, PHY, Channel and NetDevice are interconnected.

Set functions of all these components are used

Definition at line 93 of file ble-netdevice.cc.

References ns3::Object::GetObject(), m_completeConfig, m_linkLayer, m_node, m_phy, third::mobility, NS_LOG_FUNCTION, and NS_LOG_WARN.

Here is the call graph for this function:

void ns3::BleNetDevice::DoDispose ( void  )

privatevirtual

Destructor implementation.

This method is called by Dispose() or by the Object's destructor, whichever comes first.

Subclasses are expected to implement their real destruction code in an overriden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.

It is safe to call GetObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 72 of file ble-netdevice.cc.

References ns3::Object::DoDispose(), m_linkLayer, m_node, m_phy, and NS_LOG_FUNCTION.

Here is the call graph for this function:

Ptr< SpectrumChannel > ns3::BleNetDevice::DoGetChannel ( void  ) const

private

Attribute accessor method for the "Channel" attribute.

Returns

the channel to which this NetDevice is attached

Definition at line 173 of file ble-netdevice.cc.

References m_phy, and NS_LOG_FUNCTION.

Referenced by GetTypeId().

Here is the caller graph for this function:

void ns3::BleNetDevice::DoInitialize ( void  )

privatevirtual

Initialize() implementation.

This method is called only once by Initialize(). If the user calls Initialize() multiple times, DoInitialize() is called only the first time.

Subclasses are expected to override this method and chain up to their parent's implementation once they are done. It is safe to call GetObject() and AggregateObject() from within this method.

Reimplemented from ns3::Object.

Definition at line 84 of file ble-netdevice.cc.

References ns3::Object::DoInitialize(), m_linkLayer, m_phy, and NS_LOG_FUNCTION.

Here is the call graph for this function:

Address ns3::BleNetDevice::GetAddress ( void  ) const

virtual

Returns

the current Address of this interface.

Implements ns3::NetDevice.

Definition at line 217 of file ble-netdevice.cc.

References m_addr, and NS_LOG_FUNCTION.

Address ns3::BleNetDevice::GetBroadcast ( void  ) const

virtual

Returns

the broadcast address supported by this netdevice.

Calling this method is invalid if IsBroadcast returns not true.

Implements ns3::NetDevice.

Definition at line 259 of file ble-netdevice.cc.

References m_addr, NS_ABORT_MSG, and NS_LOG_FUNCTION.

Ptr< Channel > ns3::BleNetDevice::GetChannel ( void  ) const

virtual

Returns

the channel this NetDevice is connected to. The value returned can be zero if the NetDevice is not yet connected to any channel or if the underlying NetDevice has no concept of a channel. i.e., callers must check for zero and be ready to handle it.

Implements ns3::NetDevice.

Definition at line 166 of file ble-netdevice.cc.

References m_phy, and NS_LOG_FUNCTION.

uint32_t ns3::BleNetDevice::GetIfIndex ( void  ) const

virtual

Returns

index ifIndex of the device

Implements ns3::NetDevice.

Definition at line 159 of file ble-netdevice.cc.

References m_ifIndex, and NS_LOG_FUNCTION.

Ptr< BleLinkLayer > ns3::BleNetDevice::GetLinkLayer

(

void

)

const

Get the LinkLayer used by this Net Device.

Returns

the Pointer to Link Layer

Definition at line 124 of file ble-netdevice.cc.

References m_linkLayer, and NS_LOG_FUNCTION.

Referenced by GetTypeId().

Here is the caller graph for this function:

Mac48Address ns3::BleNetDevice::GetMacAddress ( void  ) const

virtual

Definition at line 203 of file ble-netdevice.cc.

References m_macAddr, and NS_LOG_FUNCTION.

uint16_t ns3::BleNetDevice::GetMtu ( void  ) const

virtual

Returns

the link-level MTU in bytes for this interface.

This value is typically used by the IP layer to perform IP fragmentation when needed.

Implements ns3::NetDevice.

Definition at line 231 of file ble-netdevice.cc.

References NS_LOG_FUNCTION.

Address ns3::BleNetDevice::GetMulticast ( Ipv4Address  multicastGroup ) const

virtual

Make and return a MAC multicast address using the provided multicast group.

RFC 1112 says that an Ipv4 host group address is mapped to an Ethernet multicast address by placing the low-order 23-bits of the IP address into the low-order 23 bits of the Ethernet multicast address 01-00-5E-00-00-00 (hex). Similar RFCs exist for Ipv6 and Eui64 mappings. This method performs the multicast address creation function appropriate to the underlying MAC address of the device. This MAC address is encapsulated in an abstract Address to avoid dependencies on the exact MAC address format.

In the case of net devices that do not support multicast, clients are expected to test NetDevice::IsMulticast and avoid attempting to map multicast packets. Subclasses of NetDevice that do support multicasting are expected to override this method and provide an implementation appropriate to the particular device.

Parameters

multicastGroup

The IP address for the multicast group destination of the packet.

Returns

The MAC multicast Address used to send packets to the provided multicast group.

Warning

Calling this method is invalid if IsMulticast returns not true.

See Also

IsMulticast()

Implements ns3::NetDevice.

Definition at line 274 of file ble-netdevice.cc.

References m_addr, NS_ABORT_MSG, and NS_LOG_FUNCTION.

Address ns3::BleNetDevice::GetMulticast ( Ipv6Address  addr ) const

virtual

Get the MAC multicast address corresponding to the IPv6 address provided.

Parameters

addr	IPv6 address

Returns

the MAC multicast address

Warning

Calling this method is invalid if IsMulticast returns not true.

Implements ns3::NetDevice.

Definition at line 282 of file ble-netdevice.cc.

References m_addr, NS_ABORT_MSG, and NS_LOG_FUNCTION.

Ptr< Node > ns3::BleNetDevice::GetNode ( void  ) const

virtual

Returns

the node base class which contains this network interface.

When a subclass needs to get access to the underlying node base class to print the nodeid for example, it can invoke this method.

Implements ns3::NetDevice.

Definition at line 180 of file ble-netdevice.cc.

References m_node, and NS_LOG_FUNCTION.

Ptr< BlePhy > ns3::BleNetDevice::GetPhy

(

void

)

const

Get PHY to be used by the link layer and this Net Device.

Returns

Pointer to PHY

Definition at line 138 of file ble-netdevice.cc.

References m_phy, and NS_LOG_FUNCTION.

Referenced by GetTypeId().

Here is the caller graph for this function:

TypeId ns3::BleNetDevice::GetTypeId ( void  )

static

Get the type ID.

Returns

the object TypeId

Definition at line 36 of file ble-netdevice.cc.

References DoGetChannel(), GetLinkLayer(), GetPhy(), ns3::MakePointerAccessor(), SetLinkLayer(), ns3::TypeId::SetParent(), and SetPhy().

Here is the call graph for this function:

bool ns3::BleNetDevice::IsBridge ( void  ) const

virtual

Return true if the net device is acting as a bridge.

Returns

value of m_isBridge flag

Implements ns3::NetDevice.

Definition at line 290 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::IsBroadcast ( void  ) const

virtual

Returns

true if this interface supports a broadcast address, false otherwise.

Implements ns3::NetDevice.

Definition at line 252 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::IsLinkUp ( void  ) const

virtual

Returns

true if link is up; false otherwise

Implements ns3::NetDevice.

Definition at line 238 of file ble-netdevice.cc.

References m_linkUp, m_phy, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::IsMulticast ( void  ) const

virtual

Returns

value of m_isMulticast flag

Implements ns3::NetDevice.

Definition at line 267 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::IsPointToPoint ( void  ) const

virtual

Return true if the net device is on a point-to-point link.

Returns

value of m_isPointToPoint flag

Implements ns3::NetDevice.

Definition at line 298 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::NeedsArp ( void  ) const

virtual

Returns

true if ARP is needed, false otherwise.

Called by higher-layers to check if this NetDevice requires ARP to be used.

Implements ns3::NetDevice.

Definition at line 322 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::Send ( Ptr< Packet >  packet, const Address &  dest, uint16_t  protocolNumber  )

virtual

Parameters

packet	packet sent from above down to Network Device
dest	mac address of the destination (already resolved)
protocolNumber	identifies the type of payload contained in this packet. Used to call the right L3Protocol when the packet is received.

Called from higher layer to send packet into Network Device to the specified destination Address

Returns

whether the Send operation succeeded

Implements ns3::NetDevice.

Definition at line 306 of file ble-netdevice.cc.

References NS_LOG_FUNCTION.

bool ns3::BleNetDevice::SendFrom ( Ptr< Packet >  packet, const Address &  source, const Address &  dest, uint16_t  protocolNumber  )

virtual

Parameters

packet	packet sent from above down to Network Device
source	source mac address (so called "MAC spoofing")
dest	mac address of the destination (already resolved)
protocolNumber	identifies the type of payload contained in this packet. Used to call the right L3Protocol when the packet is received.

Called from higher layer to send packet into Network Device with the specified source and destination Addresses.

Returns

whether the Send operation succeeded

Implements ns3::NetDevice.

Definition at line 314 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::SetAddress ( Address  address )

virtual

Set the address of this interface.

Parameters

address

address to set

Implements ns3::NetDevice.

Definition at line 210 of file ble-netdevice.cc.

References first::address, m_addr, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::SetChannel

(

Ptr< SpectrumChannel >

channel

)

Set Channel to which the Net Device, and therefore the PHY, should be attached to.

Parameters

channel

the channel to be used

Definition at line 145 of file ble-netdevice.cc.

References m_phy, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::SetIfIndex ( const uint32_t  index )

virtual

Parameters

index

ifIndex of the device

Implements ns3::NetDevice.

Definition at line 152 of file ble-netdevice.cc.

References m_ifIndex, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::SetLinkLayer

(

Ptr< BleLinkLayer >

ll

)

Set the LinkLayer to be used by this NetDevice.

Parameters

ll	the pointer to Link Layer to be used.

Definition at line 117 of file ble-netdevice.cc.

References m_linkLayer, and NS_LOG_FUNCTION.

Referenced by GetTypeId().

Here is the caller graph for this function:

void ns3::BleNetDevice::SetMacAddress ( Mac48Address  address )

virtual

Get Addresses in Mac48Address Type.

Definition at line 194 of file ble-netdevice.cc.

References first::address, m_addr, m_linkLayer, m_macAddr, and NS_LOG_FUNCTION.

bool ns3::BleNetDevice::SetMtu ( const uint16_t  mtu )

virtual

Parameters

mtu	MTU value, in bytes, to set for the device

Returns

whether the MTU value was within legal bounds

Override for default MTU defined on a per-type basis.

Implements ns3::NetDevice.

Definition at line 224 of file ble-netdevice.cc.

References NS_ABORT_MSG.

void ns3::BleNetDevice::SetNode ( Ptr< Node >  node )

virtual

Parameters

node	the node associated to this netdevice.

This method is called from ns3::Node::AddDevice.

Implements ns3::NetDevice.

Definition at line 187 of file ble-netdevice.cc.

References m_node, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::SetPhy

(

Ptr< BlePhy >

phy

)

Set PHY to be used by the Link Layer and this NetDevice.

Parameters

phy	the PHY to be used.

Definition at line 131 of file ble-netdevice.cc.

References m_phy, NS_LOG_FUNCTION, and third::phy.

Referenced by GetTypeId().

Here is the caller graph for this function:

void ns3::BleNetDevice::SetPromiscReceiveCallback ( PromiscReceiveCallback  cb )

virtual

Parameters

cb	callback to invoke whenever a packet has been received in promiscuous mode and must be forwarded to the higher layers.

Enables netdevice promiscuous mode and sets the callback that will handle promiscuous mode packets. Note, promiscuous mode packets means all packets, including those packets that can be sensed by the netdevice but which are intended to be received by other hosts.

Implements ns3::NetDevice.

Definition at line 337 of file ble-netdevice.cc.

References NS_ABORT_MSG, and NS_LOG_FUNCTION.

void ns3::BleNetDevice::SetReceiveCallback ( NetDevice::ReceiveCallback  cb )

virtual

Parameters

cb	callback to invoke whenever a packet has been received and must be forwarded to the higher layers.

Set the callback to be used to notify higher layers when a packet has been received.

Implements ns3::NetDevice.

Definition at line 330 of file ble-netdevice.cc.

References NS_LOG_FUNCTION.

bool ns3::BleNetDevice::SupportsSendFrom ( void  ) const

virtual

Returns

true if this interface supports a bridging mode, false otherwise.

Implements ns3::NetDevice.

Definition at line 344 of file ble-netdevice.cc.

References NS_LOG_FUNCTION.

Member Data Documentation

Address ns3::BleNetDevice::m_addr

private

BDA Address of this device.

It changes with every connection

Definition at line 178 of file ble-netdevice.h.

Referenced by GetAddress(), GetBroadcast(), GetMulticast(), SetAddress(), and SetMacAddress().

bool ns3::BleNetDevice::m_completeConfig

private

Whether the configuration is complete or not.

Definition at line 168 of file ble-netdevice.h.

Referenced by BleNetDevice(), and CompleteConfig().

uint32_t ns3::BleNetDevice::m_ifIndex

private

Definition at line 173 of file ble-netdevice.h.

Referenced by GetIfIndex(), and SetIfIndex().

Ptr<BleLinkLayer> ns3::BleNetDevice::m_linkLayer

private

The Link Layer for this NetDevice.

Definition at line 153 of file ble-netdevice.h.

Referenced by CompleteConfig(), DoDispose(), DoInitialize(), GetLinkLayer(), SetLinkLayer(), and SetMacAddress().

bool ns3::BleNetDevice::m_linkUp

private

Is LinkUp?

Definition at line 188 of file ble-netdevice.h.

Referenced by IsLinkUp().

Mac48Address ns3::BleNetDevice::m_macAddr

private

BDA address with Mac48Address format.

Definition at line 183 of file ble-netdevice.h.

Referenced by GetMacAddress(), and SetMacAddress().

Ptr<Node> ns3::BleNetDevice::m_node

private

Node associated with the NetDevice.

Definition at line 163 of file ble-netdevice.h.

Referenced by CompleteConfig(), DoDispose(), GetNode(), and SetNode().

Ptr<BlePhy> ns3::BleNetDevice::m_phy

private

The PHY for this NetDevice.

Definition at line 158 of file ble-netdevice.h.

Referenced by CompleteConfig(), DoDispose(), DoGetChannel(), DoInitialize(), GetChannel(), GetPhy(), IsLinkUp(), SetChannel(), and SetPhy().

---

The documentation for this class was generated from the following files:

• src/ble/model/ble-netdevice.h
• src/ble/model/ble-netdevice.cc